JOINT FINISHING

Using Paper Tape:

• Apply ¼" of compound to the drywall joint using a 4" or 6" knife.
• Apply paper tape over the joint.
• Embed the tape into the joint and wipe off excess compound.  Allow to dry, then sand.
• Apply a second coat using an 8" knife.  Feather the edges 2" beyond the first coat. 
• Allow to dry, then sand lightly, removing any raised or rough areas.
• Repeat with a third coat, using an 8" or 10" knife, if necessary.
• Use a Pole Sander or Hand Sander for sanding.

Using Mesh Tape:

• Apply self-adhesive mesh tape over the joint.
• With a 4” knife apply a thin wide of coat of compound over the mesh tape.
• Allow to dry, then sand lightly, removing any raised or rough areas.
• Apply a second coat of compound using a 6” or 8” knife, feathering the edges 2” beyond the previous coat.
• Allow to dry, then sand lightly, removing any raised or rough areas.
• Repeat with a third coat, using an 8" or 10" knife, if necessary.
• Allow to dry.
• Use a Pole Sander or Hand Sander for sanding.